For more information, join the team subscribe to the mailing list 
at the bottom of the Launchpad page

    http://launchpad.net/~hybrid-graphics-linux 

Please join this team if you are new by clicking on the "Join 
Team" link at the right of the Launchpad page. It's important to 
have as many users in the community as possible to request for 
appropriate support.

Friday, 2 July 2010

Using acpi_call module to switch on/off discrete graphics card in Linux


sudo apt-get install git
# type password

git clone http://github.com/mkottman/acpi_call.git
cd acpi_call
make
sudo insmod acpi_call.ko

# To check that the status of your VGA devices, run this command:

lspci -vnnn | grep VGA

# Unplug laptop, click on the battery indicator and take note of
# estimated remaining time.
# Now run this script:

./test_off.sh

# If you see a "works!" message, it's found a method.
To check that the status of your VGA devices has changed,
run this command again and check for the differences:

lspci -vnnn | grep VGA

Click on the battery indicator after running the test.sh script,
it should show a difference of about an extra 1-3 hours battery life.

Please join the hybrid graphics team if you are new by clicking on the
"Join Team" link at the right in this URL:

http://launchpad.net/~hybrid-graphics-linux

If you have any comments/questions, the best way to get an answer is to
subscribe to the mailing list at the bottom of that page and send an email there.

Followers